China OEM Oil Free Medical Breathing Air Compressor Piston Oxygen Booster Gas Compressor with Good quality

Product Description

Oil Free Medical High Pressure Breathing Air Compressor Piston Oxygen Booster Gas Compressor for Indonesia

Product Description

Product features

1.Touch display PLC control.
2.Remote control is optional.
3.Inlet and outlet pressure overload,temperature overheating,cooling water failure, circulation rolling alarm and stop.
4.Operation time display, maintenance cycle prompt.
5.With water tank and circulating pump without external pipeline, filling antifreeze at low temperature without obstruction.

 

Compressed media Nitrogen (must be dry and particle free)
Model VWN-60-5-16
Rated flow (standard state) 60Nm3/h
Intake air temperature ≤40
Intake pressure 0.5Mpa
Exhaust pressure 1.6Mpa
Cylinder diameter * quantity Φ90+φ65
Engine speed 470r/min
Cooling mode Air cooling
Lubrication method Fully oil-free lubrication
Compression series 2
Structural type Angle type, V type
Motor power 5.5kw
Transmission mode Belt drive
Installation type Basic type
Dual pressure controller Intake 4-6
Control mode Completely oil-free lubrication, air cooling, reciprocating piston type
Size of inlet and outlet RC1″
Dimensions  1250*500*900mm
Weight 280kg

Product Parameters

 

Compressed media
(General for
oxygen and nitrogen)
Model Capacity
(Nm3/h)
Intake
pressure
(MPa)
Exhaust
pressure
(MPa)
Power
(kW)
Dimensions
(mm)
Oxygen/Nitrogen VW-0.33/5-25 20 0.5 2.5  1220*500*800
Oxygen/Nitrogen ZWN-3.6/4-8 3.6 0.4 0.8  0.75  750*500*650
Oxygen/Nitrogen VWN-10/5-25 10 0.5 2.5  1600*700*1500
Oxygen/Nitrogen VWN-60/5-16 60 0.5 1.6  5.5  1250*500*900
Oxygen/Nitrogen VWN-20/6-20 20 0.6 2.0  1250*600*900
Oxygen/Nitrogen VWN-20/5-25 20 0.5 2.5  1050*600*1000
Oxygen/Nitrogen VWN-40/7-25 40 0.7 2.5  1250*500*900
Oxygen/Nitrogen VWN-60/4-25 60 0.4 2.5  11  1250*700*900
Oxygen/Nitrogen WWN-80/4-25 80 0.4 2.5  11  1350*700*1200
Oxygen/Nitrogen VWN-80/7-25 80 0.7 2.5  7.5  1250*700*900
Oxygen/Nitrogen VWN-60/4-30 60 0.4 3.0  1250*500*900
Oxygen/Nitrogen VWN-50/4-30 50 0.4 3.0  7.5  1250*650*1000
Oxygen/Nitrogen VWN-80/5-30 80 0.5 3.0  11  1250*700*1000
Oxygen/Nitrogen VWN-30/5-35 30 0.5 3.5  5.5  1050*500*1000
Oxygen/Nitrogen VWN-50/5-35 50 0.5 3.5  7.5  1050*700*1000
Oxygen/Nitrogen VWN-40/5-40 40 0.5 4.0  7.5  1250*600*900
Oxygen/Nitrogen VWY-80/0.5-50 80 0.05 5.0  18.5  1250*700*900
Oxygen/Nitrogen VWND-55/5-8 55 0.5 0.8  1400*810*1300
Oxygen/Nitrogen VWN-60/5-10 60 0.5 1.0  1250*500*900
Oxygen/Nitrogen VWY-75/4-16 75 0.4 1.6  7.5  1050*500*1000
Oxygen/Nitrogen VWND-100/5-10 100 0.5 1.0  5.5  1400*930*1350
Oxygen/Nitrogen VWN-120/6-16 120 0.6 1.6  11  1250*700*1000
Oxygen/Nitrogen VWN-140/5-8 140 0.5 0.8  5.5  1250*600*900
Oxygen/Nitrogen WWND-150/4-10 150 0.4 1.0  11  1430*1030*1350
Oxygen/Nitrogen SWND-240/4-10 240 0.4 1.0  15  1500×1100×1620
Oxygen/Nitrogen VWY-120/5-10 120 0.5 1.0  7.5  1250*600*1000
Oxygen/Nitrogen SWY-150/4-16 150 0.4 1.6  15  1250*900*1480
Oxygen/Nitrogen WWN-100/4-25 100 0.4 2.5  15  1350*700*1200
Oxygen/Nitrogen WWN-120/6-30 120 0.6 3.0  15  1250*800*1200
Oxygen/Nitrogen WWN-120/6-45 120 0.6 4.5  18.5  1350*1100*1100
Oxygen/Nitrogen WWN-80/5-45 80 0.5 4.5  15  1350*700*1200
Oxygen/Nitrogen WWN-240/5-10 240 0.5 1.0  15 1350*800*1200
Oxygen/Nitrogen WWN-300/0.5-8-II 300 0.05 0.8  22*2 2500*1200*800
Oxygen/Nitrogen WWNFB-900/4-8-II 900 0.4 0.8  22*2 2600*1000*900
Oxygen/Nitrogen VWN-180/5-25-II 180 0.5 2.5  11*2 1500*1350*1100
Oxygen/Nitrogen WWN-200/3-18-II 200 0.3 1.8  11*2 1450*1350*1100
Oxygen/Nitrogen WWN-200/6-30-II 200 0.6 3.0  11*2 1600*1600*1200
Oxygen/Nitrogen WWFB-430/4-9 430 0.4 0.9  22  1500*1000*800

Successful cases


 

FAQ

FAQ:
Q1. Are you trading company or manufacture ?

A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

 

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

 

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

 

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
     2. Well-trained engineers available to overseas service.
     3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

 

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

 

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

 

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

 

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
     2. Some key parts are imported from overseas
     3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

 

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

 

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
 

Shipping Cost:

Estimated freight per unit.



To be negotiated
After-sales Service: Online Support
Warranty: 24 Months
Lubrication Style: Oil-free
Customization:
Available

|

What Is the Fuel Efficiency of Gas Air Compressors?

The fuel efficiency of gas air compressors can vary depending on several factors, including the compressor’s design, engine size, load capacity, and usage patterns. Gas air compressors typically use internal combustion engines powered by gasoline or propane to generate the mechanical energy required for compressing air. Here’s a detailed explanation of the factors that can influence the fuel efficiency of gas air compressors:

1. Engine Design and Size:

The design and size of the engine in a gas air compressor can impact its fuel efficiency. Engines with advanced technologies such as fuel injection and electronic controls tend to offer better fuel efficiency compared to older carbureted engines. Additionally, larger engines may consume more fuel to produce the required power, resulting in lower fuel efficiency compared to smaller engines for the same workload.

2. Load Capacity and Usage Patterns:

The load capacity and usage patterns of the gas air compressor play a significant role in fuel efficiency. Compressors operating at or near their maximum load capacity for extended periods may consume more fuel compared to compressors operating at lower loads. Additionally, compressors used intermittently or for lighter tasks may have better fuel efficiency due to reduced demand on the engine.

3. Maintenance and Tuning:

Proper maintenance and tuning of the gas air compressor’s engine can improve fuel efficiency. Regular maintenance tasks such as oil changes, air filter cleaning/replacement, spark plug inspection, and tuning the engine to the manufacturer’s specifications can help ensure optimal engine performance and fuel efficiency.

4. Operating Conditions:

The operating conditions, including ambient temperature, altitude, and humidity, can affect the fuel efficiency of gas air compressors. Extreme temperatures or high altitudes may require the engine to work harder, resulting in increased fuel consumption. Additionally, operating in humid conditions can affect the combustion process and potentially impact fuel efficiency.

5. Fuel Type:

The type of fuel used in the gas air compressor can influence its fuel efficiency. Gasoline and propane are common fuel choices for gas air compressors. The energy content and combustion characteristics of each fuel can affect the amount of fuel consumed per unit of work done. It is important to consider the specific fuel requirements and recommendations of the compressor manufacturer for optimal fuel efficiency.

6. Operator Skills and Practices:

The skills and practices of the operator can also impact fuel efficiency. Proper operation techniques, such as avoiding excessive idling, maintaining consistent engine speeds, and minimizing unnecessary load cycles, can contribute to improved fuel efficiency.

It is important to note that specific fuel efficiency ratings for gas air compressors can vary widely depending on the aforementioned factors. Manufacturers may provide estimated fuel consumption rates or fuel efficiency data for their specific compressor models, which can serve as a reference point when comparing different models or making purchasing decisions.

Ultimately, to maximize fuel efficiency, it is recommended to select a gas air compressor that suits the intended application, perform regular maintenance, follow the manufacturer’s guidelines, and operate the compressor efficiently based on the workload and conditions.

What Are the Key Components of a Gas Air Compressor Control Panel?

A gas air compressor control panel typically consists of several key components. Here’s a detailed explanation:

1. Power Switch:

The power switch allows the operator to turn the compressor on or off. It is usually a toggle switch or a push-button switch located on the control panel.

2. Pressure Gauges:

Pressure gauges display the compressed air pressure at different stages of the compression process. Commonly, there are two pressure gauges: one to measure the incoming air pressure (suction pressure) and another to measure the outgoing compressed air pressure (discharge pressure).

3. Control Knobs or Buttons:

Control knobs or buttons are used to adjust and set various parameters of the compressor operation. These controls may include pressure settings, on/off timers, automatic start/stop functions, and other operational parameters specific to the compressor model.

4. Emergency Stop Button:

An emergency stop button is a critical safety feature that immediately shuts down the compressor in case of an emergency. Pressing the emergency stop button cuts off power to the compressor and stops its operation.

5. Motor Start/Stop Buttons:

Motor start and stop buttons allow the operator to manually start or stop the compressor motor. These buttons are used when manual control of the motor is required, such as during maintenance or troubleshooting.

6. Control Indicators:

Control indicators include various lights or LEDs that provide visual feedback about the compressor’s status and operation. These indicators may include power indicators, motor running indicators, pressure indicators, and fault indicators to signal any malfunctions or abnormal conditions.

7. Control Panel Display:

Some gas air compressors feature a control panel display that provides real-time information and feedback on the compressor’s performance. The display may show parameters such as operating pressure, temperature, maintenance alerts, fault codes, and other relevant information.

8. Start/Stop Control Circuit:

The start/stop control circuit is responsible for initiating and controlling the motor start and stop sequences. It typically includes relays, contactors, and other electrical components that enable the control panel to safely start and stop the compressor motor.

9. Safety and Protection Devices:

Gas air compressor control panels may incorporate safety and protection devices to safeguard the compressor and prevent potential damage or hazardous situations. These devices can include overload relays, thermal protection, pressure relief valves, and other safety features.

10. Control Panel Enclosure:

The control panel enclosure houses and protects the electrical components and wiring of the control panel. It provides insulation, protection from dust and moisture, and ensures the safety of the operator.

In summary, a gas air compressor control panel typically includes a power switch, pressure gauges, control knobs or buttons, emergency stop button, motor start/stop buttons, control indicators, control panel display (if applicable), start/stop control circuit, safety and protection devices, and a control panel enclosure. These components work together to monitor and control the compressor’s operation, ensure safety, and provide essential information to the operator.

What Are the Primary Applications of Gas Air Compressors?

Gas air compressors have a wide range of applications across various industries and activities. These compressors, powered by gas engines, provide a portable and versatile source of compressed air. Here’s a detailed explanation of the primary applications of gas air compressors:

1. Construction Industry:

Gas air compressors are extensively used in the construction industry. They power a variety of pneumatic tools and equipment, such as jackhammers, nail guns, impact wrenches, and concrete breakers. The portable nature of gas air compressors makes them ideal for construction sites where electricity may not be readily available or practical to use.

2. Agriculture and Farming:

Gas air compressors find applications in the agricultural sector. They are used to operate air-powered machinery and tools, including pneumatic seeders, sprayers, and agricultural pumps. Gas air compressors provide the necessary power to carry out tasks such as crop seeding, irrigation, and pest control in agricultural settings.

3. Recreational Activities:

Gas air compressors are commonly utilized in recreational activities. They are used to inflate tires, sports balls, inflatable structures, and recreational equipment such as air mattresses, rafts, and inflatable toys. Gas air compressors provide a convenient and portable solution for inflating various recreational items in outdoor settings.

4. Mobile Service Operations:

Gas air compressors are employed in mobile service operations, such as mobile mechanics, tire service providers, and mobile equipment repair services. These compressors power air tools and equipment required for on-site repairs, maintenance, and servicing of vehicles, machinery, and equipment. The mobility of gas air compressors allows service providers to bring their tools and compressed air source directly to the location of the service requirement.

5. Remote Job Sites:

Gas air compressors are well-suited for remote job sites or locations without access to electricity. They are commonly used in industries such as mining, oil and gas exploration, and remote construction projects. Gas air compressors power pneumatic tools, machinery, and drilling equipment in these environments, providing a reliable source of compressed air for operational needs.

6. Emergency and Backup Power:

In emergency situations or during power outages, gas air compressors can serve as a backup power source. They can power essential equipment and systems that rely on compressed air, such as emergency lighting, communication devices, medical equipment, and backup generators. Gas air compressors provide a reliable alternative power solution when electrical power is unavailable or unreliable.

7. Sandblasting and Surface Preparation:

Gas air compressors are used in sandblasting and surface preparation applications. They provide the high-pressure air necessary for propelling abrasive media, such as sand or grit, to remove paint, rust, or other coatings from surfaces. Gas air compressors offer the power and portability required for sandblasting operations in various industries, including automotive, metal fabrication, and industrial maintenance.

8. Off-Road and Outdoor Equipment:

Gas air compressors are commonly integrated into off-road and outdoor equipment, such as off-road vehicles, utility trucks, and recreational vehicles. They power air-operated systems, including air suspension systems, air brakes, air lockers, and air horns. Gas air compressors provide the necessary compressed air for reliable and efficient operation of these systems in rugged and outdoor environments.

Overall, gas air compressors have diverse applications in construction, agriculture, recreational activities, mobile service operations, remote job sites, emergency power backup, sandblasting, and various off-road and outdoor equipment. Their portability, versatility, and reliable power supply make them indispensable tools in numerous industries and activities.

China OEM Oil Free Medical Breathing Air Compressor Piston Oxygen Booster Gas Compressor   with Good qualityChina OEM Oil Free Medical Breathing Air Compressor Piston Oxygen Booster Gas Compressor   with Good quality
editor by CX 2023-09-30

Recent Posts