China Recovered Hydrogen Compressor with Mulstage Compression for Process Gas Industry

Product Description

Yuanju diaphragm compressor

Thanks to decades years of the rapid industry development in china ,the reciprocating technology

is propelled and our clients can benefit from the competitive price, and diverse range of standardized

compressor , highly quality compressed process gas is achieved including ,but not limited to :air ,

oxygen ,nitrogen ,hydrogen,natural gas ,mixed gas.

Structure
 

diaphragm compressor consist of compression system , membrane system, hydraulic lubrication system.

Continuously reciprocating piston movement drive the hydraulic oil ,thus which push metallic diaphragm
  set to compress the Gaseous in the cylinder of compressor. Membrane compressor consist of compression
 system and hydraulic lubrication system , also the 2 systems be completely separated by a set of metal
diaphragm plates base on the static seal.

In view of the special structure design of diaphragm compressor different from common piston compressor,

it is suitable for small flow,Compression of flammable, explosive, corrosive and high outlet pressure gas.

 

Safety protection

When the diaphragm breaks, the compressor alarms and stops

When the discharge pressure exceed the rated value, the compressor alarms and stops
 

Optional

When the suction pressure is low , the compressor alarms and stops

When the lubricating oil pressure is low , the compressor alarms and stops

When the lubricating oil pressure is high , the compressor alarms and stops

When the cooling water pressure is low , the compressor alarms and stops

When the temperature of bearing bush is low than the rated value, the compressor alarms and stops.

When the temperature of bearing bush is high than the rated value , the compressor alarms and stops.

 

Specification

 

 Material lis

 

     

Name

Material

 

cylinder cover

3Cr13

Stainless steel

membrane

00Cr15Ni15

 

gas pipes and flange

304

Stainless steel

water pipes and cooler

304

Stainless steel

oil pipes

304

Stainless steel

chamber

45

steel

crankshaft

45

steel

connecting rod

45

steel

piston rod

40Cr

steel

piston ring

MTCuMoCr-400

 

cross head

MTCuMoCr-400

 

piston

45

steel

cross head pin

20Cr

steel

small head bushing of connecting rod

ZQSn10-1

 

O ring for gas side

fluorine rubber

 

crankcase

HT200

Cast iron

 

 

 

 

 

 

 

 

 

     

 

Feature

–High purity of gas

–High discharge pressure

–High pressure ratio

–No gas leakage

–low noise and low power of motor

–Media gas can’t include water.

–Max power be up to 160kw

–0.5mm thickness of diaphragm

–Splash and pressurized lubrication

-High purity 

Good quality compressed gas can be obtained for medical and food industry.

 

No any dust particles will make the gas being pollutes in gas compression membrane chamber due
to the wear of sliding parts, which absolutely ensures the gas before and after compression with
the same purity. Therefore, this kind of compressor is  suitable for the pressurization and transp-
ortation of high purity gas (such as electronic gas), breathing gas, and hydrogen in fuel cell technology
Diaphragm  compressor  suitable for compressing high purity gas, flammable and explosive gas, toxic gas, oxygen, and so on.
 

-High discharge pressure

 Wide range of discharge pressure, the max pressure can be up to 50MPa.
 

-High pressure ratio

  During the compression the special structure brings good heat dissipation and small clearance
  volume in chamber, so the high pressure ratio is easily be achieved.
 

No gas leakage

  The gas compression chamber of compressor is sealed through a metal static seal.

we have kept a large stock of compressor and spare parts ,
low maintenance costs,just need to replace the diaphragm.

Excellent technical support

We provide a complete service from the first customer contact ,designing,manufacturing to
installationand commissioning,as well as the excellent after sales support  
 

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Recovered Hydrogen Compressor with Mulstage Compression for Process Gas Industry  China Recovered Hydrogen Compressor with Mulstage Compression for Process Gas Industry

Recent Posts